Beneteau First 31.7

Sail Area

I : 38.94 ft
J : 11.29 ft
P : 35.43 ft
E : 12.80 ft
Working Sail Area : 574.79 sq ft

Description fournie par le constructeur

Derived from the famous Figaro Bénéteau, this 31 footer is an aknowledged benchmark in cruising as well as racing.

Additional Description

• Deck plate for detachable forestay.
• ?Tuff Luff? grooved forestay (in place of genoa furling gear).
• Wide sprayhood with two frames, in grey.
• Pulpit with opening forward.
• Freshwater foot pump.
• 2 lee cloths.
• 50 L or 88 L rigid WC holding tank with sea/shore pump-out.
• Waterproof speakers to cockpit.
• Varnished soles.
• Windex windvane.
• Raymarine 3 display Multifunction Repeaters to mast with ST60 remote control.
• Automatic pilot: ST6001 Plus controller and computer with compass and LS40 helm drive.
• Raymarine PC Interface (RS32 input/output series in PC format).
• Helmsman?s footrest.

Additional Description

Convenient stowage space and handling positions:

• Teak slatted cockpit seats.
• Two teak slatted helm seats port and starboard, sloping outwards for more comfort at the helm.
• Life-raft stowage in aft of cockpit.
• Large sail locker to starboard.
• Gas locker.
• Self-draining cockpit.

Additional Description

• Woodwork in pear-coloured Mukali.
• The sole is laminated with black strips.
• Accommodation layout: 1 owner?s cabin forward, 1 aft cabin, 1head, L-shaped galley.

• Double berth (2 x 1.40 m) with mattress.
• Shelving along the hull.
• Hanging locker.
• Under-berth stowage.
• Lewmar T30 opening deck hatch with blind for ventilation and natural light. This hatch also provides an emergency exit to the deck if necessary.
• Halogen deckhead light.

• Headroom: 1.82 m.
• Symmetric saloon with settees and mattress providing two sea berths.
• Square drop-leaf saloon table with stainless steel base and bottle stowage to centre.
• Shelving along the hull.
• 2 fixed hull ports.
• 1 x Lewmar T30 deck hatch over saloon table.
• 2 x Lewmar T1 opening ports to coachroof coamings.
• 2 halogen deckhead lights with independent switches.

Additional Description

The electrical circuit comprises:

• 1 x 12V - 70 Amp engine battery.
• 1 x 12V - 70 Amp service battery.
• 9-switch 12 V electrical panel.

Additional Description

• Laminated work surface with fiddle that also acts as a handrail.
• Stainless steel sink.
• Hot and cold pressurised mixer tap.
• Stowage under sink with baskets.
• Waste bin.
• 12 V (70 L) refrigerating unit with storage baskets, insulated with injected polyurethane foam.
• Gimballed 2 burner hob with grill and stainless steel protection bar which also serves as a handrail.
• Stowage lockers for utensils, crockery and food.
• Lewmar T1 opening port to coachroof coaming above cooker.
• An halogen deckhead light.

Additional Description

• Stainless steel pulpit forward with wide space for anchor handling.
• Bi-colour navigation lights fixed to pulpit.
• Stainless steel pushpit in two parts with ensign staff holder and closing guardrail.
• A double row of adjustable stainless steel guardrails surrounds the boat.
• 8 stainless steel shaped stanchions with flush moulded stainless steel bases (Bénéteau patent).
• Teak toe-rails surrounding the deck.
• Two stainless steel handrails bolted to the coachroof.

Additional Description

• 21 HP Yanmar Sail Drive engine.
• Engine compartment insulated with alveolate foam.
• Fuel tank with approx. 30 L capacity and sediment filter.
• Engine hatch built into the cockpit.
• Water and fuel filters and sediment reservoir.

Additional Description

• The hull is single-skinned laminated GRP.
• A structural inner moulding with uni-directional fabric is bonded and laminated to the hull. Its structural role is important as it takes and absorbs the stresses at pressure points (chain plate tie rods, keel, rudder etc.) and spreads any loads, guaranteeing reduced strain on the hull. The surface to the inner hull makes cleaning easier and provides a better finish.
• The hull gel coat is grey.

Additional Description

• The deck is balsa sandwich construction (glass fibre, balsa, polyester resin) for an optimal strength/weight ratio and for good thermal and sound insulation.
• A roughened non-slip surface increases safety over all deck surfaces.
• An inner deck moulding is sealed to the deck to round off the finish.
• The deck is reinforced under deck fittings (winches, tracks, U-bolts, cleats).

Disclaimer

La société offre les informations relatives à ce navire de bonne foi mais n'est pas en mesure de garantir l'exactitude de ces informations ni l'état du navire. Il revient à l'acheteur d'instruire ses agents ou ses experts afin de vérifier et de faire valider les informations de son choix. Ce navire est offert sous réserve d'une vente préalable